top of page

MOUNTING ON VEHICLE UNDERBODY

REGUIRED MOUNTING PART

  • 3x metal strips (V2A)

  • 3x screws (V2A)

  • 3x serrated lock washers (V2A)

  • 1x screw locking glue

  • 3x self-tapping drilling screws

Deep speaker assembly parts

TOOLS REQUIRED

  • drilling machine

  • HSS drill (7mm)

  • hammer

  • Reversible ratchet / ratchet wrench

  • Socket (Size: 10)

  • Torque wrench (tightening torque: 10Nm)

  • Tool for bending the steel strips

  • vise or pliers

Wichtige Montagehinweise

IMPORTANT INSTRUCTIONS FOR FASTENING TO THE UNDERBODY OF THE VEHICLE

In order to avoid damage to the speaker due to the influence of heat, the distance to heat sources such as the rear silencer, tailpipe or middle silencer should be at least 3 cm. Installation near the catalytic converter must be avoided in any case.

FASTENING TO THE UNDERFLOOR:

To do this, at least three breakpoints must be attached using metal strips

This means that all three holders on the speaker on the threaded inserts  1-2-3    and at three points ABC   must be attached to the vehicle underbody.

7.PNG

It is important to ensure that when screwing in the self-tapping drilling screws ABC No damage is caused to vehicle parts behind it.

7.1.PNG

SECURING THE SCREWS:

The M6x14 stainless steel screws supplied must be glued and screwed into the threaded inserts on the speaker using a serrated lock washer and screw locking adhesive.

8.png

REGULAR CONTROLL:

The speaker(s) is/are to be checked regularly to ensure that it is firmly in place. Media-CarTec GmbH assumes no liability for loose and fallen off parts and their effects.

Positionierung des Lautsprechers

CORRECT POSITIONING OF THE SPEAKER UNDER THE VEHICLE
 

Please note the exact installation position. This must be observed during assembly, so that in the event of water ingress from spray water or similar, water can drain freely and not collect in the loudspeaker housing. The loudspeaker must be installed in such a way that it does not come into contact with other vehicle parts such as the body, heat shields, exhaust system, etc.
Furthermore, the speaker must be securely fastened using the attachments supplied.

Always mount the loudspeaker with the tailpipe tilted slightly downwards and pointing towards the rear of the vehicle.

2.png

The speaker can be easily rotated horizontally.

3.PNG

Do not mount  with the pipe opening in the direction of travel to avoid water ingress.

6.PNG

Do not mount  with overhead tailpipe.

4.PNG

Do not mount with the tailpipe tilted upwards to avoid water ingress.

5.PNG

Do not mount below the prescribed ground clearance.

montageleitfaden FU

INSTALLATION GUIDE (SAMPLE)

This is only an example assembly aid and cannot be transferred to every vehicle type. The positioning of the speaker and the adjustment of the holder is therefore individual and vehicle-specific.

SEARCH POSITION

Find free space under the vehicle.

It is essential to avoid contact with surrounding vehicle parts.

ADJUST HOLDER

Metal strips must be individually adapted to the conditions under the vehicle.

​

The metal strips can be bent using a vice or pliers.

Drill holes (7mm) in the metal strips.

SECURE BOLTS

Apply a drop of screw locking adhesive to the threads of the thread inserts to be used.

ATTACH THE BRACKET TO THE SPEAKER

Hand-tighten the screws and serrated lock washer with holder on the loudspeaker.

SCREW THE SPEAKER TO THE UNDERBODY

Screw and tighten the loudspeaker bracket with self-tapping drilling screws at three points on the vehicle underbody.

TIGHTEN SCREWS

Tighten the screws with the serrated lock washer on the speaker using a torque wrench.

 

tightening torque:10Nm

CONNECT CABLE

Plug in the speaker cable.

bottom of page